Connection To A Computer Or Printer - Promax PROFI-70 Manual De Instrucciones

USER'S MANUAL. PROFI-70

4.3 Connection to a Computer or Printer.

The PROFI-70 allows the connection to a PC or to a serial printer for data
transfer, by means of the connection cable model CC-208.
Do not connect any cable other than that supplied by the manufacturer,
otherwise serious damage may be caused to the equipment.
1) Prior to connecting the equipment to a PC, disconnect both from their
respective power supplies.
2) Connect the end of the connection cable corresponding to the PROFI-70 to
connection [8] and the other end to the serial port of your computer or printer.
Once the computer or printer has been connected, select on the PROFI-70 the
LOGGER operation mode. If PRINT function is selected data will be dumped to the
remote unit through the serial port.
The communication parameters used by the PROFI-70, and which therefore
must be defined on the remote unit (PC ) are the following:
Rate
Data bits
Parity
Stop bits
02/2007
19200 bauds
8 bits
None
1
Page 25