Promax PROFI-70 Manual De Instrucciones página 58

Once completed the detection of the stations, the user can save into an internal
acquisitions memory (LOGGER) that data collected through the option STORE [F2] that
appears in the display lower selection box. Also you can accede to SCAN [F4] or
ANALYSE [F5] mode to obtain more data about the station selected by means of the
navigation buttons [6] and the selection button [7].
The PROFI-70 allows users to store up to 50 loggers (or acquisitions) in the
memory. The measurements are stored in memory for later visualisation, printing or
transference to a PC.
A screen like the following figure appears when the LOGGER [F3] key is pressed.
On the left, the name of the logger (logger00 in the example) followed by the time and
date it was acquired (only if execution of the function STORE from the ANALYSE
operation mode has been performed on that logger) are indicated. The user can save
each acquisition with a customised name (loggerxx, by default), which is entered
through the alphanumeric keyboard [8].
The selection box contains the functions that can be performed over the logger
indicated on the top line: DEL [F2], VIEW [F3] or PRINT [F4].
To access the various loggers stored, press the navigation buttons [6] until the
selection arrow is over the logger name to be accessed.
To return to the measurement functions menu, press the BACK [F5] option from
the lower selection box.
Page 20
Figure 8. — List of stored loggers.
USER'S MANUAL. PROFI-70
02/2007