Operation - Promax MZ-805 Manual De Instrucciones

MZ-805 L/C/R meter

5 OPERATION

This section covers general use of the instrument. Although the basic
capabilities are largely obvious from the keypad functions, users requiring full
performance and accuracy are advised to read this and the Measurement
Principles sections in full.
Switching On
Switch on the instrument using the ON/OFF switch on the rear panel.
At switch on the instrument runs a short internal self test procedure,
displays the software version, and then waits in Auto mode for a component to
measure. If it is switched on with a component connected it will automatically
detect and measure that component.
To fully disconnect from the AC supply unplug the mains cord from the
back of the instrument or switch off at the AC supply outlet; make sure that the
means of disconnection is readily accessible. Disconnect from the AC supply
when not in use.
Display
August 2002 Page 13