Location - 3M Macurco CM-E1 Manual De Instrucciones

Location

There are two usual sources of CO in homes -- defective heat sources (furnaces or wood burning stoves) and automobiles
running in adjoining garages. The CM-E1 can detect CO from these sources, as well as any other sources of CO.
For best operation, mount a CM-E1 in the hallway near each bedroom area. In addition, another CM-E1 may be mounted just
inside the door from the adjoining garage. Consider placing another detector in a bedroom that is adjacent to a furnace room.
This product is intended for use in ordinary indoor locations of family living units and office workspaces. The CM-E1
is not designed to measure compliance with Occupational Safety and Health Administration (OSHA) commercial or
industrial standards. (UL 2034)
Do NOT mount the unit in the garage. Do NOT mount the CM-E1 where the normal ambient temperature is below 40°F
(4.4°C) or exceeds 100°F (37.8°C), or within 5 feet (1.5 meters) of a cooking or heating appliance.
10
WARNING