Use Instructions And Limitations; Use For - 3M Macurco CM-E1 Manual De Instrucciones

USER INSTRUCTIONS AND LIMITATIONS
Each person using this equipment must read and understand the information in these User Instructions before use. Use
of this equipment by untrained or unqualified persons, or use that is not in accordance with these User Instructions,
may adversely affect product performance and result in sickness or death. For proper use, see supervisor or User
Instructions, or call 3M in U.S.A., 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.

Use For

The CM-E1 is a low voltage (9-32 VDC) detector of Carbon Monoxide (CO). The CM -E1 is designed for connection to UL
Listed Fire Alarm/Burglary Control Panels. Alarm control panels that work on 12 or 24 VDC can provide battery backup to
the CM-E1 detectors. This carbon monoxide detector is designed to detect CO gas from ANY source of combustion.
Use only for monitoring the gas which the sensor and detector are designed to monitor. Failure to do so may result in
exposures to gases not detectable and cause sickness or death. For proper use, see supervisor or User Instructions, or
call 3M in U.S.A., 1-800-243-4630. In Canada, call Technical Service at 1-800-267-4414.
6
WARNING
WARNING