Maintenance; Cleaning; Reset Function; Accessories - RIDGID micro CA-100 Manual Del Usuario

Maintenance

WARNING
Remove batteries before cleaning.

Cleaning

• Always clean the imager head and cable
after use with mild soap or mild detergent.
• Gently clean the LCD with a clean dry
cloth. Avoid rubbing too hard on the LCD.
• Use only alcohol swabs to clean the cable
connections.
• Wipe the hand held display unit down with
a clean, dry cloth.

Reset Function

If the unit stops functioning and does not op-
erate, press the Reset Button. (See Figure 9.)
The unit may recover to normal operation
when restarted.

Accessories

WARNING
To reduce the risk of serious injury, only
use accessories specifically designed
and recommended for use with the
RIDGID micro CA-100 Inspection Camera
such as those listed below. Other Ac-
cessories suitable for use with other
tools may be hazardous when used with
the micro CA-100 Inspection Camera.
micro CA-100 Inspection Camera
Accessories*
Catalog
No. Description
31128 3' Cable Extension
31133 6' Cable Extension
37103 Imager Head and Cable - 17 mm
(*List subject to change.)

Storage

The RIDGID micro CA-100 Inspection Cam-
era must be stored in a dry secure area be-
tween -20°C (-4°F) and 60°C (140°F).
Store the tool in a locked area out of the
reach of children and people unfamiliar with
the micro CA-100 Inspection Camera.
Remove the batteries before any long period
of storage or shipping to avoid battery leak-
age.
micro CA-100 Inspection Camera

Service and Repair

WARNING
Improper service or repair can make the
RIDGID micro CA-100 Inspection Camera
unsafe to operate.
Service and repair of the micro CA-100 In-
spection Camera must be performed by a
RIDGID Independent Authorized Service
Center.
For information on your nearest RIDGID In-
dependent Service Center or any service or
repair questions:
• Contact your local RIDGID distributor.
• Visit www.RIDGID.com or www.RIDGID.eu
to find your local RIDGID contact point.
• Contact RIDGID Technical Services De-
partment at [email protected],
or in the U.S. and Canada call (800) 519-
3456.

Disposal

Parts of the RIDGID micro CA-100 Inspection
Camera contain valuable materials and can
be recycled. There are companies that spe-
cialize in recycling that may be found locally.
Dispose of the components in compliance
with all applicable regulations. Contact your
local waste management authority for more in-
formation.
For EC Countries: Do not dispose
of electrical equipment with house-
hold waste!
According to the European Guide-
line 2002/96/EC for Waste Elec-
trical and Electronic Equipment and
its implementation into national legislation,
electrical equipment that is no longer usable
must be collected separately and disposed of
in an environmentally correct manner.

Battery Disposal

For EC countries: Defective or used batteries
must be recycled according to the guideline
2006/66/EEC.
9