Replacing The Blades (Combi Models) - Sima DEL-32 Manual De Instrucciones Original

12.2

REPLACING THE BLADES (COMBI MODELS)

If any of the cutting blades is damaged, replace them as to the following procedure:
1 CHANGING THE FIXED BLADE. Make sure the machine is unplugged from electricity. Lift the safety guard
off the blades. Afterwards, remove the screws and rotate the blade for a new cutting session or substitute it with a
new blade if necessary.
2 CHANGING THE MOVEABLE BLADE. To change this blade, it is necessary that the connecting rod is
displaces outside its housing. Operate in the following way: with the machine switched on and the inversion pivot of
the bending plate removed from its position, press the pedal and observe the movement of the blade. When we see
that the blade is outside its housing, we depress the pedal. Right after, we unplug the machine from the electricity to
avoid any accident. In this way, we can reach the screws that fix the blade. Remove the screws of the blade for a new
cutting or substitute it with a new blade if necessary.
19
ENGLISH