Starting-Up And Using The Machine - Sima DEL-32 Manual De Instrucciones Original

6.3 ANGLE INVERSION AND SELECTION PIVOT
The inversion pivot (Fig. P) It is used to select the plate rotation angle. Depending on the rotation direction
of the plate that we choose, we have to insert the pivot in different sectors relative to the S1 and S2 senson
Sensor S1, is to stop the bending plate when the pivot passes over it.
Sensor S2, is to stop the bending plate when it returns to its original position.

7. STARTING-UP AND USING THE MACHINE

WARNING: All safety recommendations must be followed, either the ones mentioned in the present user
manual or those complying with all labour risks prevention norms in every location.
WHEELWORK: SIMA bending and combined machines do not need any wheelwork operations as they are
specially designed to obtain the maximum performance from start.
NORMAL USE OF THE MACHINE:
The bending machines have been designed for bending and cutting flat and reinforced steel bars for use in the
structure and other construction. Each other use that has not been expressively indicated is considered abnormal. Any
tool or accessory added or amended without written authorization from the manufacturer is considered inappropriate
and dangerous. If any damage or injury is caused as a result thereof or by misuse of the machine, SIMA S.A. exempts
all responsibility as manufacturer. The machine must be installed on a plane, firm and horizontal surface and the
ground should not be soft.
This machine MUST NOT BE USED IN THE RAIN. Cover with waterproof materials. If the machine
has been exposed in the rain check before connecting the electrical parts are not wet. Always work
with good lighting conditions.
8
ENGLISH