Connecting To Electricity Source - Sima DEL-32 Manual De Instrucciones Original

7.2

CONNECTING TO ELECTRICITY SOURCE.

The machine has a display so that the user can see the voltaje supplied to the machine before the voltaje
reached the electrical components and causes any damage.
To connect the machine do the following
1. Open the door and connect the socket to the electrical box socket .This way the electricity will not reach
the motor and you can see the voltage coming into the machine.
IMPORTANT: The transformer has a tolerance of de
limit is passed then it will damage the transformer.
400v machine = 380V min / Max 430V max
230V machine = 210V min / Max 250V max
2. Select a bending direction on the electrical panel and the green light will come on.
3. Depress the pedal to start to bend and see which way the plate is bending
Position 0. Machine disconnected
Position 1. Machine connected in anti clockwise.
Position 2. Machine connected in clockwise position.
When connecting the machine, make sure the machine is turning in the way the sticker indicates, this
will avoid accidents with the accessories on the bending plate.
If it doesn´t turn the right way please change the phases.
±10%
of the stated voltage capability of the machine. If this
10
ENGLISH