Making A Cut - Sima DEL-32 Manual De Instrucciones Original

10. MAKING A CUT.

Remove all the bolts, shells and pivots that are on the bending plate.
Never use the machine for cutting and bending at the same time as this presents a great risk to
accidents and an over effort for the motor and the reducer causing serious damages.
CONTINUOUS CUTTING
Remove all the bolts, shells and pivots that are on the bending plate and press the pedal.
DISCONTINUOUS CUTTING
To obtain a cutting in cycles, you can prepare the machine, placing an inversion pivot P right in the interior,
small hole in the end of course of the plate exactly when the blades close.
14
ENGLISH