Making A Bend - Sima DEL-32 Manual De Instrucciones Original

9. MAKING A BEND

Before starting to bend a rebar make some bends without any acessories on the machine until you are
comfortable with the movement.
1. Divide the bending plate into 4 imaginary 90degree sections.
2. Select bending direction with the control panel button.
3. Insert the plate pin to the left of 0 degrees so achieve an angle of 90.
4. Step on the pedal and don´t lift off. The bending plate will move until the pin reaches the inversión
switch.
5. To make the plate return lift your foot off the pedal and press again and the plate will return.
13
ENGLISH