Tabla de contenido
Idiomas disponibles
Idiomas disponibles
7.1 FIXING OF THE REAR PLATE TO THE COLUMN
Fix the rear plate to the column (Fig. 5, 6) in accordance to the desired coordinates. In case an iron pillar is available, screw
directly onto the column the plate with 3 screws M8. In case you need to fix the bracket onto a concrete pillar, use the fixing
plate to be fastened with 3 Fischer screws of Ø 8 mm. When the backing plate is fixed, anchor the rear part of the piston to
the plate and fasten it firmly (Fig. 6).
ATTENTION! when establishing the height off the ground at which to fasten the plate to the pillar, keep in mind that the plate
for anchoring the piston to the gate must be fastened 40 mm below that on the post to obtain horizontal levelling (Fig. 9).
20 / 52
134,25
Motor
13,75
92
Ø 10,5
62
Pin
Seeger
Fig. 5
Plate
Fig. 6
6-1624846
rev. 16
13/11//2018
Tabla de contenido
