Filter Replacement - Beko ÖWAMAT 1 Instrucciones De Instalación

Ocultar thumbs Ver también para ÖWAMAT 1:
Tabla de contenido
Installation • Instalación
S
S
1
H2 O
24 h
8
Installation • Instalação
J
TEST
L
S
S
WEEKLY !
2
4
2
2
1
EXCHANGE !
5
3
3
S
S
2
english
FILTER CHECK
The quality of the discharged clean
water must be checked every week.
For this purpose, a water sample
should be taken at the sampling valve
on the riser and compared (visual
check) with the cloudiness of the
reference jar.
If the sampled water is as cloudy as
the reference liquid, or even cloudier,
the filter unit will need to be replaced.

FILTER REPLACEMENT

Carry out steps
1 - 5
Depending
upon
operational
conditions, there may be up to 3 filter
replacements necessary per year.
According to the „operator's duty of
care" under the Water Resources Act,
the operator must always keep an ori-
ginal replacement filter set in stock.
Spent filters must be properly dispo-
sed of.
MAINTENANCE
1
Shut off all inlets before
maintance work. Where appropriate,
switch off compressor.
2
Hoses and hose connections
must be inspected regularly
In the case of dirt accumulation,
replace filter and thoroughly clean the
unit with water (do not use detergents
or rinsing agents). Recommended
once a year!
Fill fresh water into the ÖWAMAT unit.
Spent filters must be properly
disposed of.
ÖWAMAT 1
Tabla de contenido
loading

Tabla de contenido