Setting The Clock And Minute Timer; To Set The Clock; To Set The Minute Timer - Sears Kenmore 790 Manual Del Usuario

Setting the Clock and
Minute Timer
Note: The oven function will not work
if the time of day clock is not set.

To Set the Clock

When the range is first plugged in, or when the power supply to the range has
been interrupted, the display will flash "12:00".
1. Push .
2. Within 5 seconds, push and hold the
of day appears in the display.
Note: The clock cannot be changed during any timed bake or self-clean
cycle.

To Set the Minute Timer

1. Push .
2. Push the to increase the time in one minute increments. Push and
hold the to increase the time in 10 minute increments. The timer can
be set for any amount of time from 1 minute to 11 hours and 59 minutes.
Note: If you push the
minutes.
3. The display shows the timer count down in minutes until one minute
remains. Then the display will count down in seconds.
4. When the set time has run out, the timer will beep 3 times. It will then
continue to beep 3 times every 60 seconds until
Note: The minute timer does not start or stop cooking. It serves as an extra
timer in the kitchen that will beep when the set time has run out. The minute
timer can be used alone or during any of the other oven functions. When the
minute timer is in use with any other mode, the minute timer will be shown in
the display. To view other functions, push the function pad for that mode.
To Change the Minute Timer while it is in use:
While the timer is active and shows in the display, push and hold the
to increase or decrease the time.
To Cancel the Minute Timer before the set time has run out:
Push .
6
or until the correct time
first, the timer will advance to 11 hours and 59
is pushed.
or