Control Button Features; Setting The Clock - Sears Kenmore PRO 790.79623 Manual Del Usuario

Control Button Features

rEAD THE InSTrUCTIOnS CArEFULLY BEFOrE USIng THE OvEn. For satisfactory use of your oven, become
familiar with the various features and functions of the oven as described below. Detailed instructions for each feature
and function follow later in this Use & Care guide.
SELECTOr COnTrOL KnOB- Use to select the Bread Proof,
Warm & Hold, Bake, Convection Bake, Convection Roast, Broil
or Clean Feature.
CLEAn—
BrEAD PrOOF— Used to
Used to
set the Bread Proof feature.
select the
Self-Cleaning
cycle.
Off
BrOIL—
Used to
select the
broil function.
COnvECTIOn
rOAST— Used
to select the
convection
roasting mode.
COnvECTIOn
BAKE— Used to
select the Convection
Bake feature.

Setting the Clock

The button is used to set the clock. Until the clock is set, all the other oven functions will not be available. The clock
may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for 12 hour operation. When
the range is first plugged in, or when the power supply to the appliance has been interrupted, the display will flash "PF"
(Power Failure).
When PF flashes in the display, press the
To set the clock
1. Press the button. The control will beep once and the time of day will appear in the display.
2. To set the clock to the current time of day, press the
1 minute increments, or keep the
increments.
3. Release the button when the desired time is reached. Wait 5 seconds and the change will be accepted.
Changing between 12 or 24 hour time of day display
1. Press and hold the
clock).
2. Press the or
3. Wait 5 seconds for the change to be accepted by the oven control.
WArM & HOLD —
Used to set the Warm
& Hold feature.
BAKE—
OvEn
Used to
InTErIOr
select
LIgHT PAD—
the bake
Used to turn
function.
oven interior
light ON and
OFF.
button. No other button will stop the time from flashing.
or button pressed to increase or decrease the time of day in 10 minute
button for 6 seconds. The display will show either "12" (for 12 hour clock) or "24" (for 24 hour
button to switch between the 12 and 24 hour time of day display.
OvEn TEMPErATUrE COnTrOL KnOB—
Use to select the Bread Proof, Warm & Hold,
or the required Bake, Convection Bake,
Convection Roast, Broil or Clean Temperature.
OvEn TEMPErATUrE
InDICATOr — This indicator
shows the current set temperature
in the oven.
SCrOLL
PADS— Used
350
300 400
to scroll up
250 450
or down
200 500
Warm &
Broil
for many
Hold
F Clean
functions.
CLOCK SET PAD— Used
to set the time of day.
TIMEr PAD— Used to set or cancel the minute timer.
The minute timer does not start or stop cooking.
COnvECTIOn COnvErT— Used to select
the Convection Convert feature.
or button to increase or decrease the time of day in
15
Off
PrOBE PAD— Used to set
the Probe feature.