Control Pad Functions - Sears Kenmore 790 Manual Del Usuario

Control Pad Functions

CLEAR PAD— Used to
clear any function
previously entered
except the time of day and minute timer. Push
CLEAR to stop cooking.
BAKE PAD—Used to
enter the normal
baking mode
temperature.
BROIL PAD—
Used to select the variable broil
function.
CLEAN PAD—
Used to select the
OVEN, PREHEAT & LOCK LIGHTS— The "OVEN" light
self-cleaning
will glow each time the oven unit turns on to maintain the
cycle.
set oven temperature. The "PREHEAT" light will glow
when the oven is first set to operate, or if the desired
temperature is reset higher than the actual oven
temperature. The "LOCK" light will flash until the door
locks when the self-clean cycle is in use. It glows
constantly after the door locks.
The oven can be programmed to:
• Bake normally
• Time bake
• Broil
• Self-clean
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pushed. If desired, the controls can be programmed
for silent operation. Push and hold
sounding when a pad is pushed. To return the sound, push and hold
Note: The control will return to the audible mode after a power outage.
Temperature conversion:
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Push . "— — —" appears in the display.
2. Push and hold the
3. Push and hold
4. Push the or
5. Push any function pad to return to normal operating mode.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various functions
of the oven as described below.
UP and DOWN ARROW PADS— Used along with the
function pads to select oven temperature, cooking
time, stop time (when programming an automatic stop
time), time of day, clean time and minute timer.
. After 7 seconds, the control will beep once. This will block the controls from
until "HI" appears in the display.
until °F or °C appears in the display.
to change °F to °C or °C to °F.
TIMER PAD—
Used to set or
cancel the minute
timer. The minute
timer does not
start or stop
cooking.
again for 7 seconds until 1 beep is heard.
5
CLOCK PAD— Used
to set the time of day.
FEATURE
INDICATOR
LIGHTS— These
light to show which
feature is in use.
BAKE TIME PAD—
Used to enter the
length of the baking
time.
STOP TIME PAD—
Used to set the
desired stop time for
baking. Can be
used with BAKE
TIME to program a
delayed bake cycle.