Control Pad Functions
Note:
The appearance of your oven control may differ slightly from the one illustrated below. However, all functions are
the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
CLOCK SET
PAD— Used
to set the
time of day.
OVEN INTERIOR
LIGHT PAD—
Used to turn oven
interior light ON or
OFF.
SELECT SELF-
CLEAN PAD—
Used to select the
Self-Cleaning cycle.
A 2, 3 or 4 hour
Self-Clean time
may be selected.
TIMER SET/OFF PAD—
Used to set or cancel the
minute timer. The minute
timer does not start or stop
cooking. Also,
TIMER SET/OFF pad is
used to set the Continuous
Bake feature.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature. When the
preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed for
silent operation. Press and hold
sounding when a pad is pressed. To return the sound, press and hold
once.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press
. "— —" appears in the display.
Broil
2. Press and hold the
3. Press and hold
Broil
4. Press the
or
5. Press any control pad to return to normal operating mode.
COOK TIME
UP and DOWN ARROW PADS— Used
PAD— Used to
along with the function pads to select oven
enter the length of
temperature, cook time, start time (when
the baking time.
programming an automatic start time), time
of day, clean time and minute timer.
Cook
Time
Select
Timer
Delay
Clean
Set/Off
Start
DELAY START
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN"
PAD— Used to set
light will glow each time the oven turns on to maintain the set oven
the desired start
temperature. The "PREHEAT" light will glow when the oven is first
time for baking &
set to operate, or if the desired temperature is reset higher than the
Self-Clean. May be
actual oven temperature. The "DOOR LOCKED" light will flash
used with COOK
when the oven door locks and unlocks or when using the Self-Clean
TIME to program a
cycle or the oven door lockout is activated. The indicator light will
delayed bake
glow constantly after the door locks.
cycle.
Delay
. After 7 seconds, the control will beep once. This will block the controls from
Start
until "HI" appears in the display.
until °F or °C appears in the display.
to change °F to °C or °C to °F.
BAKE PAD—
Used to select the
bake function.
Oven
Preheat
Door Locked
Delay
again for 7 seconds until the control beeps
Start
13
FEATURE INDICATOR
LIGHTS— These light to
show which feature is in
use.
Bake
Bake
Broil
STOP
Warm &
STOP/CLEAR
Hold
Clear
PAD— Used to
clear any function
Oven
3
Lockout
previously entered
except the time of
day and minute
timer. Press STOP/
CLEAR to stop
cooking. Also the
STOP/CLEAR pad
is used to activate
oven door lockout
setting.
BROIL PAD—
Used to select the
variable broil
function.
WARM & HOLD
PAD— Used to set
the Warm & Hold
feature.