Led Indicators; Connectors And Buttons - Axis A1001 Guia De Instalacion

AXIS A1001 Network Door Controller

LED Indicators

LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
Lock Green
Red
Unlit
Note
• The Status LED can be configured to flash while an event is active.
• The Status LED can be configured to flash for identifying the unit. Go to Setup >
Additional Controller Configuration > System Options > Maintenance .

Connectors and Buttons

For specifications and operating conditions, see page 18.
I/O Interface
Reader Data Connector
Two 6-pin terminal blocks supporting RS485 and Wiegand protocols for communication with the
reader. For specifications, see page 19.
Reader I/O Connector
Two 6-pin terminal blocks for reader input and output. In addition to the 0 V DC reference point
and power (DC output), the reader I/O connector provides the interface to:
• Digital input – For connecting, for example, reader tampering alarms.
Indication
Steady for connection to a 100 MBit/s network. Flashes for
network activity.
Steady for connection to a 10 MBit/s network. Flashes for network
activity.
No network connection.
Steady green for normal operation.
Steady during startup and when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
Steady when not energized.
Steady when energized.
Floating.
16