Specifications - Sennheiser EM500 G2 Manual Del Usuario

Specifications

RF characteristics
Modulation
Frequency ranges
Receiving frequencies
Switching bandwidth
Nominal/peak deviation
Frequency stability
Receiver principle
Sensitivity (with HDX, peak deviation)
Adjacent channel rejection
Intermodulation attenuation
Blocking
Squelch
Pilot tone squelch
Antenna inputs
AF characteristics
Noise reduction system
EQ presets (switchable, effect the line and
monitor outputs):
Preset 1: "Flat"
AF frequency response 40–18,000 Hz
Preset 2: "Low Cut"
Preset 3: "HiBoost"
Preset 4: "Low Cut & Hi Boost"
S/N ratio (at 1 mV and peak deviation)
THD (at nominal deviation and 1 kHz)
AF output voltage
(at peak deviation 1 kHz
AF
Overall unit
Temperature range
Power supply
Power consumption
Dimensions [mm]
Weight
wideband FM
518–554, 626–662, 740–776, 786–822, 830–866 MHz
8 channel banks with up to 20 factory-preset channels each
1 channel bank with up to 20 freely selectable channels
(1440 frequencies, tunable in steps of 25 kHz)
36 MHz
± 24 kHz / ± 48 kHz
≤ ± 15 ppm
true diversity
<2.5 μV at 52 dBA
≥ 70 dB
≥ 70 dB
≥ 75 dB
4 steps:
can be switched off
2 BNC sockets
Sennheiser
Cut approx. -3 dB at 200 Hz
Boost approx. +6 dB at 10,000 Hz
Cut approx. -3 dB at 200 Hz
Boost approx.+6 dB at 10,000 Hz
≥ 115 dB(A) (AF OUT)
≤ 0.9 %
¼
'' (6.3 mm) jack socket (unbalanced): +12 dB
)
XLR socket (balanced):
–10 °C to +55 °C
10.5–16 V DC, nominal voltage 12 V DC
approx. 300 mA
212 x 145 x 38
approx. 1100 g
S/N ratio
rms
Off
Low: 5 dBμV
Mid: 15 dBμV
High: 25 dBμV
HDX
u
+18 dB
u
29