The Em 500 G2 Rack-Mount Receiver; The Channel Bank System - Sennheiser EM500 G2 Manual Del Usuario

4

The EM 500 G2 rack-mount receiver

The EM 500 G2 rack-mount receiver is part of the evolution wireless series
ew 500 G2. With this series, Sennheiser offers high-quality state-of-the-art
RF transmission systems with a high level of operational reliability and ease
of use. Transmitters and receivers permit wireless transmission with studio-
quality sound. The excellent transmission reliability of the ew 500 G2 series
is based on the use of
further optimized PLL synthesizer and microprocessor technology,
the HDX noise reduction system,
the pilot tone squelch control,
the true diversity technology (rack-mount receiver only),
and the scan function for scanning the channel banks for free channels.

The channel bank system

The EM 500 G2 receiver is available in five UHF frequency ranges with 1440
receiving frequencies per frequency range. Please note: Frequency usage is
different for each country. Your Sennheiser agent will have all the necessary
details on the available legal frequencies for your area.
Range A: 518 to 554 MHz
Range B: 626 to 662 MHz
Range C: 740 to 776 MHz
Range D: 786 to 822 MHz
Range E: 830 to 866 MHz
The receiver has nine channel banks with up to 20 switchable channels each.
channel bank 1...8
channel bank U
Each of the channels in the channel banks "1" to "8" has been factory-preset
to a receiving frequency (see enclosed frequency table). These receiving
frequencies cannot be changed but have been preset so that e.g. country-
specific regulations on frequency usage are taken into account.
The channel bank "U" (user bank) allows you to store your selection out of
1440 receiving frequencies that are freely selectable within the preset
frequency range.
channel 1 preset frequency
channel 2
preset frequency
preset frequency
channel 20
channel 1 freely selectable frequency
channel 2 freely selectable frequency
freely selectable frequency
channel 20