Indications And Displays; Indications And Displays Of The Receiver; Remote Displays Of An Ew 500 G2 Transmitter - Sennheiser EM500 G2 Manual Del Usuario

8

Indications and displays

When used together with an ew 500 G2 transmitter, the receiver provides
information on its operating states and those of the received transmitter
(remote displays).

Indications and displays of the receiver

"PILOT" display
The "PILOT" display appears on the display panel when the pilot tone
evaluation is activated (see "Activating/deactivating the pilot tone
evaluation" on page 23).
Diversity display
The EM 500 G2 receiver operates on the true diversity principle (see
"Diversity reception" on page 28).
The diversity display indicates whether diversity section I (i.e. antenna 1)
or diversity section II (i.e. antenna 2) is active.
Button backlighting
During standby operation, the
receiver is switched on, the
additionally backlit in green.

Remote displays of an ew 500 G2 transmitter

Transmitter battery status indication
The 4-step transmitter battery status display
provides information on the transmitter's remaining battery/accupack
capacity:
3 segments: capacity approx. 100 %
2 segments: capacity approx. 70 %
1 segment: capacity approx. 30 %
Battery icon flashing LOW BAT
In addition, the text "LOW BAT" (backlit in red)
flashes in alternation with the standard display.
ON button is backlit in red. When the
SET button and the
on the receiver display panel
/ button are