Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer
SYMBOL
NAME
V
Volts
A
Amperes
Hz
Hertz
W
Watt
PLQ
Minutes
~
Alternating Current
Direct Current
No Load Speed
Class II Construction
PLQ
Per Minute
Wet Conditions Alert
Read The Operator's Manual
Eye Protection
Safety Alert
No Hands Symbol
No Hands Symbol
No Hands Symbol
No Hands Symbol
Hot Surface
English(original instructions)
SYMBOLS
EN - 6
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc.,
per minute
Do not expose to rain or use in damp locations
To reduce the risk of injury, user must read and
understandoperator's manual before using this
product.
Always wear safety goggles or safety glasses with
side shields that comply with ANSI 287.1. and, as
necessary, a full face shield when operating this
product.
Precautions that involve your safety.
Failure to keep your hands away from the blade will
result in serious personal injury.
Failure to keep your hands away from the blade will
result in serious personal injury.
Failure to keep your hands away from the blade will
result in serious personal injury.
Failure to keep your hands away from the blade will
result in serious personal injury.
To reduce the risk of injury or damage, avoid
contact with any hot surface.