Tabla de contenido
Idiomas disponibles
Idiomas disponibles
GENERAL SAFETY RULES
WARNING!
Read all instructions. Failure to follow all instructions
OLVWHG EHORZ PD\ UHVXOW LQ HOHFWULF VKRFN ¿UH DQG
or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains-operated
(corded) power tool or battery-operated (cordless)
power tool.
SAVE THESE INSTRUCTIONSWORK AREA SAFETY
Keep work area clean and well lit. Cluttered or
darkareas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Charger plugs must match the outlet. Never modifythe
plug in any way. Do not use any adapter plugs
withearthed (grounded) chargers. Unmodified plugs
andmatching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfacessuch
as
refrigerators.There is an increased risk of electric
shock if your bodyis earthed or grounded.
Do not expose chargers to rain or wet conditions.
Water entering a charger will increase the risk
ofelectric shock.
Do not abuse the cord. Never use the cord for
carrying,pulling or unplugging the charger. Keep cord
awayfrom heat, oil, sharp edges or moving parts.
Damagedor entangled cords increase the risk of
electric shock.
When operating a charger outdoors, use an extension
cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk
of electric shock.
MODEL
BATTERY PACK
32042a
29842(2Ah)
$K
PERSONAL SAFETY
Stay alert, watch what you are doing and use
commonsense when operating a power tool. Do not
use a power tool while you are tired or under the
influence ofdrugs, alcohol or medication. A moment of
inattention while operating power tools may result in
serious personal injury.
Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appro-
English(original instructions)
pipes,
radiators,
ranges
CHARGER
29862
29862
priate conditions will reduce personal injuries.
Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools
with your finger on the switch or plugging in power
tools that have the switch on invites accidents.
Remove any adjusting key or wrench before
turningthe power tool on. A wrench or a key left
attached toa rotating part of the power tool may result
in personalinjury.
Do not overreach. Keep proper footing and balanceat
all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery.Keep your hair, clothing and gloves away
from movingparts. Loose clothes, jewellery or long hair
can be caughtin moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these
areconnected and properly used. Use of these devices
canreduce dust-related hazards.
Do not wear loose clothing or jewellery. Contain
longhair. Loose clothes, jewellery, or long hair can be
drawninto air vents.
Do not use on a ladder or unstable support.
Stablefooting on a solid surface enables better control
of thepower tool in unexpected situations.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
toolfor your application. The correct power tool will
and
do the jobbetter and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turnit
on and off. Any power tool that cannot be controlledwith
the switch is dangerous and must be repaired.
'LVFRQQHFW WKH SOXJ IURP WKH SRZHU VRXUFH DQGRUWKH
battery pack from the power tool before makingany
adjustments, changing accessories, or storingpower
tools. Such preventive safety measures reducethe risk
of starting the power tool accidentally.
Store idle power tools out of the reach of children
anddo not allow persons unfamiliar with the power
toolor these instructions to operate the power tool.
Powertools are dangerous in the hands of untrained
users.
Maintain power tools. Check for misalignment
orbinding of moving parts, breakage of parts and
anyother condition that may affect the power
tool'soperation. If damaged, have the power tool
repairedbefore use. Many accidents are caused by
poorlymaintained power tools.
Keep cutting tools sharp and clean. Properly
maintainedcutting tools with sharp cutting edges are
less likely tobind and are easier to control.
Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
EN - 3
Capítulos
Tabla de contenido
