Symbols On The Product; Risk Levels - GreenWorks JSD401 Manual Del Operador

EN
• Battery tools do not have to be plugged into an
electrical outlet; thus, they are always in operating
condition. Be aware of possible hazards when not
using your battery tool or when changing accessories.
Obey this instruction will reduce the risk of electric
shock , fire, or serious injury,
• Do not place battery tools or their batteries near fire
or heat. This will reduce the risk of explosoion and
possibl injury.
• Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
• Batteries can explode in the presence of a source of
ignition, such as a pilot light. To reduce the risk of
serious injury, never use any cordless product in the
presence of open flame. An exploded battery can propel
debris and chemicals. If exposed, flush with water
immediately.
• Do not charge battery tool in a damp or wet location.
Obey this instruction will reduce the risk of electric
shock.
• For best results, your battery tool should be charged
in a location where the temperature is more than 50°F
but less than 100°F. To reduce the risk of serious injury,
do not store outside or in vehicles.
• Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your sink, wash immediately with soap and water. If
liquid gets into your eyes, flush them with clean water for
at least 10 minutes, then seek immediate medical
attention. Obey this instruction will reduce the risk of
serious injury.
• Keep these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you borrow someone this tool, loan them these
instructions also to prevent incorrect use of the machine
and possible injury.
3

SYMBOLS ON THE PRODUCT

Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
tool better and safer.
Symbol
V
-1
min
Explanation
Volts
No-load speed
Direct current
Safety alert
English
Symbol
4

RISK LEVELS

The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYM- SIGNAL
BOL
DANGER
WARNING
CAUTION
CAUTION
6
Explanation
Read and understand all instructions
before operating the product, and fol-
low all warnings and safety instruc-
tions.
Wear ear protection.
Wear eye protection
Do not expose the product to rain or
moist conditions.
Wear a dust mask
No Hands Symbol
No Hands Symbol
No Hands Symbol
Hot Surface
MEANING
Indicates an imminently haz-
ardous situation,which, if not
avoided, will result in death
or serious injury.
Indicates a potentially hazard-
ous situation,which, if not
avoided, could result in death
or serious injury.
Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.
(Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.