Operation In Autonomous Mode; Associating A Technical Detector Or Remote Control To The Transmitter - DELTA DORE TTRTC TYXAL+ Manual De Instalación

9. Operation in autonomous mode

The transmitter can operate in autonomous mode
without being associated with an alarm control unit.
In this case, the detectors (leak detector, smoke
detector, etc.) are directly associated with the
transmitter.
It is possible to associate a TL 2000 TYXAL+
remote control featuring the SOS function and/or a

9.1 Associating a technical detector or remote control to the transmitter.

9.1.1 Direct association
Open up the transmitter
T2
Press the T2 button for
5 seconds.
The transmitter beeps.
If the transmitter does not emit
any sound, initialise it (see §
initialisation - restoring factory
settings)
9.1.2 Association via a repeater
Open up the transmitter and the repeater.
On the transmitter
T2
Press the T2 button of the
transmitter for 5 seconds.
The transmitter beeps.
>5s
The transmitter vocally indicates the detector type associated and
its status.
Press the button of each detector to associate (16 max.).
To exit the association mode press the T2 button of the transmitter
(the exit is automatic after 5 minutes).
T1
>5s
Briefly press the T1
button of the repeater.
The green LED will
come on briefly.
REP TYXAL+ that enables the repetition of informa-
tion sent by a product that the transmitter would not
capture (environment or distance).
The transmitter starts a call directly if any event is
detected. The remote monitoring and intercom func-
tions are compatible with this operating mode.
Press the detector button.
(example: smoke detector)
Press and hold the remote control's ON
button for 5 seconds.
On the repeater
Press the T2 button of the
repeater.
The red LED is on and steady.
66
ON
>5s
T2