Operation With A Cs 8000 Tyxal+ Alarm Control Unit; Associate The Transmitter With The Alarm Control Unit; Personalising The Transmitter - DELTA DORE TTRTC TYXAL+ Manual De Instalación

6. Operation with a CS 8000 TYXAL+ alarm control unit

6.1 Associate the transmitter with the alarm control unit.

Switch the alarm control unit to
maintenance mode (see guide for CS 8000
TYXAL+ alarm control unit § Maintenance
mode)
• Before switching the alarm control unit to
maintenance mode, the monitoring must be
deactivated (OFF).
• The alarm control unit can only be switched
to maintenance mode from a product already
associated.
• The CS 8000 TYXAL+ alarm control unit must
be associated with a CLT 8000 TYXAL+ touch
On the CLT 8000 TYXAL+ touch screen keypad:
Ê Enter the installer code, press Settings,
then select the menu: Installation > Products
25/11/14 12:48
OFF
Enter your code
SOS Settings
Ë Briefly press the T1 button of the transmitter.
The transmitter emits a beep when the T1 button is pressed,
then a second beep to confirm the association.
Î The alarm control unit confirms the association with a beep.
The associated product is displayed on the screen (e.g. TTRTC TYXAL+).
Í You can now configure and personalise the transmitter
from the CLT 8000 TYXAL+ touch screen keypad.

7. Personalising the transmitter

Use the touch screen interface to configure
your transmitter even more easily.
The table opposite shows the function that can
be personalised on the TTRTC TYXAL+ and
TTGSM TYXAL+ transmitters from the CLT 8000
TYXAL+ touch screen keypad.
(Menu: Installation > Products > Configure).
(1): Example: a child comes home and deactivates the
system via the remote control or badge reader, the GSM
telephone
transmitter sends an SMS to the parents.
(2): With a GSM telephone transmitter, you can select the call
numbers that will receive a warning by SMS if an event
occurs.
Access code 25/11/14
XXXXXX
SOS Ok Info
screen keypad.
The switch to maintenance mode
automatically and briefly activates the
indoor siren of the alarm control unit as
well as a transmitter call cycle.
12:48 Settings
Installation
OFF
Clock
Languages
My home
Settings Return
Download
Programming
Access codes
Software version
Name the products
Tamper alarm
Call numbers
Remote monitoring
Incoming calls
SIM card
SMS alert to
relatives (1)
Voice/SMS
distribution option (2)
Auto attendant
Alarm control unit
monitoring
55
CS 8000 TYXAL+ CLT 8000 TYXAL+
Maintenance
mode
Installation
Products
Zones
Door chime
Ok Return
Test
Initialisation
TTRTC TTGSM
TYXAL+ TYXAL+
transmitter transmitter
4 4
4 4
4 4
4 4
4
-
4
-
4
-
4
-
4 4
4 4
EN
Ok