Stacking Beds For Transport Or Storage - Vermeiren Illico Manual De Instalación

Ocultar thumbs Ver también para Illico:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 105
EN
NL
h
PL
CS
[7]
Footboard in trolley upper
part L&R. Lock the footboard
with red lever (g).
Headboard on trolley upper
part L&R. Lock with red lever
(h).
3.3
WARNING
Lifting of (stacked) beds may only be done by authorised and trained personnel and with
suitable lifting equipment!
Transportation of stacked beds is only allowed by trained and authorized personnel
according to the instructions in this manual, the instructions of the vehicle and the local
transportation regulations.
Stacked beds should be moved on firm, flat and level surfaces, to minimize the risk of
tipping over.
Always use the stacking connectors (i) to keep two stacked transport trolleys in line.
Two beds can only be stacked without side rails and without lifting pole.
g
[8]
After folding, each side bar is mounted vertically:
Use the Velcro straps to connect:
Check if all parts are well secured.

Stacking beds for transport or storage

Risk of severe injuries and damage
CAUTION
Risk of injuries and damage
with its lower shaft in rotation point (f) of leg section;
with top part in plastic mount (e) on upper connector.
top part in plastic mount (e) on upper connector;
the head section support to head section frame;
the leg section support to leg section frame.
CAUTION
Risk of injuries or damage
Installation manual
- 8 -
2018-07
Transport
[9]
Illico
e
f
Tabla de contenido
loading

Tabla de contenido