Air2 Remote-Control Key - INIM Electronics Air2 Manual De Instalación Y Programación

In order to comply with the EN 50131 series of standards, double balancing is
required when either terminal T1 or T2 is configured as an input.
Ferromagnetic materials which are located in the vicinity of the mounting position
can influence the magnetic field and can result in the reduced operating capacity
of the device.
The Air2 remote-control key has 4 buttons which can be programmed from the
control panel.
For Air2-KF100 versions, it is possible to choose between two different graphics
for the button symbols.
Table 12: Technical features of Air2 remote-control keys
Models
Battery
"Low battery" fault voltage
during standby
Current draw
maximum
Buzzer
temperature
Operating
environmental
relative
conditions
humidity
Dimensions (W x H x D)
Weight
Rubber button cover
Security rating
Environmental class
Number of available PIN code
combinations
Table 13: Description of Air2-KF100 parts
A Key1/F1, LED1-red
B Key2/F2, LED2-red
C Key3/F3, LED3-red
D Key4/F4, LED4-red
Thanks to the two-way signal exchange between the Air2-BS200 and the remote-
control keys, all models of Air2 keys are capable of notifying the user, by means of
visual and audible feedback signals (beep and LED signals) of the successful
outcome of requested operations.
Push
LED 1
button
F1 1 flash
F2
F3
F4
F2 + F3
F3 + F4
Any
Failure of the LED to light, after pressing the corresponding button and the successful
execution of the command, is an indication that the wireless battery is running low.
Panel response
Command not received
Operation not done
Operation done
10

Air2 remote-control key

KF100
61 x 41 x 12mm 69 x 42 x 15 mm 72 x 41 x 16mm
15g
2 models:
- with icons
- with numbers
(Figure 4 - Air2-KF100, page 114)
E
F
G
Table 14: Air2 remote-control keys
LED 2 LED 3
1 flash
1 flash
1 flash 1 flash
1 flash
4 flashes 4 flashes
Table 15: Panel notifications
Confirmation LED
green
3 flashes
Pebble
Lithium CR2032 3V
Less than 2.4V
0A
30mA
Multitone
from -10 to +40°C
93% without condensation
23g
1 model (with icons and numbered
buttons)
2
II
24
2
Confirmation LED - red/green
Icon graphic keys
Keys with numbers
Buzzer
LED 4
signal
beep
beep
beep
1 flash beep
beep
1 flash beep
Buzzer signal
red
1 flash
4 flashes
ATTENTION!
2-4
EN 50131-1
EN 50131-5-3
EN 50130-4
EN 50130-5
CEB T031
Ergo
25g
Operation
Activates shortcut 1
Activates shortcut 2
Activates shortcut 3
Activates shortcut 4
Block/Unblock remote-control device
Enrolling
Remote-control key locked signal
bop
long beep
Description of products
Wireless accessories