L.B.White Premier TS080 Manual De Instrucciones página 31

FIG. 36
OUTLET PRESSURE TAP
INTERNAL PRESSURE REGULATOR
LOW PRESSURE GUAGE
EXAMPLE SHOWS PRESSURE FOR L.P. GAS
ALWAYS REFER TO PRESSURE ON DATAPLATE
D. Completion
1. Once the proper inlet and burner manifold
pressures have been confi rmed and/or
properly set, close the fuel supply valve to the
heater and allow the heater to burn off any gas
remaining in the gas supply line.
2. Disconnect the heater from its electrical
supply.
3. Remove the gauges and connecting hoses.
4. Install pressure tap plugs and tighten securely.
Check for gas leaks.
Premier Ductable Heaters
LOW PRESSURE GUAGE
ON
OFF
INLET PRESSURE TAP
Owner's Manual • Premier 80-170
31