Optional Accessories (Not Included) To Use Glomex Antennas; Necessary Tools For Assembly (Not Provided) - Glomex MK2+ Serie Manual Del Usuario

VENUS SATURN MARS RHINE
3.1 OPTIONAL ACCESSORIES (NOT
INCLUDED) TO USE GLOMEX
ANTENNAS
To be able to use your new GLOMEX satellite
antenna for boats, you will have to procure or buy
also:
- a TV set;
- a satellite receiver for channel selection.
The table below lists all the GLOMEX optional
components, with relevant code.
Optional accessory
Satellite decoder i-CAN 1110SV TIVÙSAT 230 VAC
- 12 VDC
XDome terrestrial digital - satellite HD combi
decoder (DVB-T + DVB-S + DVB-S2) compatible
with SKY ITALIA - 230 VAC
Stainless steel support 0°- 5°
Twin radome
Radome painting - RAL colour chosen by the
customer
Line amplifier
4. NECESSARY TOOLS FOR ASSEM-
BLY (NOT PROVIDED)
Procure all tools and materials listed below. They
will be necessary to complete installation.
- Electric drill (1).
- 8.5 mm drill tip for radome assembly (2).
- 28 mm hollow mill for drilling the passage hole
for the antenna connector cable (3).
- Phillips screwdriver (with adequate dimensions
for control unit installation) (4).
- 11 mm wrench (for the installation of the coaxial
cable connectors) (5).
- Reciprocating saw (to create the compartment
in case of wall built-in installation of the control
unit; use the template provided on page 67) (6).
- LOCTITE ® 638 (7)
V9... TWIN - R9804 TWIN
Fig. 2
54
GLOMEX code
V9193
V9192
V9500
SATPAINT
V9115
www.glomex.it