3.1 OPTIONAL ACCESSORIES (NOT INCLUDED) TO USE GLOMEX ANTENNAS
To be able to use your new GLOMEX satellite
antenna for boats, you will have to procure or buy
also:
- a TV set;
Optional accessory
Satellite decoder i-CAN 1110SV TIVÙSAT 230 VAC
- 12 VDC
XDome terrestrial digital - satellite HD combi
decoder (DVB-T + DVB-S + DVB-S2) compatible
with SKY ITALIA - 230 VAC
Line amplifier
SD card with new satellite
SD card with software update
Stainless steel support 0°- 5°
Twin radome
Radome painting - RAL colour chosen by the
customer
Line amplifier
4.
NECESSARY TOOLS FOR
ASSEMBLY (NOT PROVIDED)
Procure all tools and materials listed below. They
will be necessary to complete installation.
- Electric drill (1).
- 8.5 mm drill tip for radome assembly (2).
- 28 mm hollow mill for drilling the passage hole
for the antenna connector cable (3).
- Phillips screwdriver (with adequate dimensions
for control unit installation) (4).
- 11 mm wrench (for the installation of the coaxial
cable connectors) (5).
- Reciprocating saw (to create the compartment
in case of wall built-in installation of the control
unit; use the template provided on page 51) (6).
www.glomex.it
URANIA 2 V9331 - PANDORA V8001 - RHEA V8100
- a satellite receiver for channel selection.
The table below lists all the GLOMEX optional
components, with relevant code.
GLOMEX code
V9193
V9192
V9115
4.120.0077
4.120.0078
V9500
V9331 TWIN/V8001 TWIN/V8100 TWIN
SATPAINT
V9115
S
WARNING
Plan the whole installation before proceeding!
Please consider the lay-out of the various compo-
nents, the distance between them, the length of the
various cables and the accessibility to the equip-
ment once it is installed.
S
WARNING
Always lift the antenna from the lower radome and
never from the upper radome or any part inside it.
Fig. 2
43
Upper radome
Lower radome