Optional Accessories (Not Included) To Use Glomex Antennas; Necessary Tools For Assembly (Not Provided) - Glomex DISCOVERY S460S Manual De Instrucciones

3.1 OPTIONAL ACCESSORIES (NOT
INCLUDED) TO USE GLOMEX
ANTENNAS
To be able to use your new GLOMEX satellite
antenna for mobile vehicles, you will have to pro-
cure or buy also:
- a TV set;
- a satellite receiver for channel selection.
The table below lists all the GLOMEX optional
components, with relevant code.
Optional accessory
Satellite receiver TIVÙSAT
230 VAC - 12 VDC
XDome terrestrial digital - satellite HD combi
receiver (DVB-T + DVB-S + DVB-S2) compatible
with SKY ITALIA - 230 VAC
SD card with new satellite
SD card with software update
Coaxial cable, 10 m long, for antenna - control unit
connection, with integrated moisture protection
4. NECESSARY TOOLS FOR
ASSEMBLY (NOT PROVIDED)
- Electric drill (1).
- Drill tips: 3.5 mm (for fastening the control unit to
solid wood or metal), 6 mm (for expansion plugs
in lightweight or hollow furniture or chipboard,
for fastening the control unit), 8 mm (for fasten-
ing the radome) (2).
- ø 25 mm hollow mill (for cutting the hole for fair-
lead assembly) (3).
- Phillips screwdriver (with adequate dimensions
for control unit opening) (4).
- 11 mm wrench (for the installation of the coaxial
cable connectors) (5).
- 2 mm Allen wrench (for M4 dowels) (6).
- Reciprocating saw (to drill a hole in case of wall built-in installation of the control unit; use the
template provided on page 54) (7).
- Sealant like SIKAFLEX®252 or similar (8).
www.glomexmobile.com
I-CAN 1110 SV
Plan the whole installation before proceeding!
Please consider the lay-out of the various compo-
nents, the distance between them, the length of the
various cables and the accessibility to the equip-
ment once it is installed.
Fig. 2
45
DISCOVERY S460S
EXPLORER S460M
GLOMEX code
V9193
V9192
4.120.0077
4.120.0078
4.070.0119
S
WARNING