Fuel Quality - ECOFOREST VAP 100 Manual De Instalación Y Mantenimiento



Heat flow. (See technical features).

Heating return. (See technical features).

Safety valve discharge. (See technical features).Channel the 2 valves.

Charge-discharge. (See technical features).

Boiler's own steam traps (inside the boiler).

Drain siphon.

Normally closed valve

Water main.It has 3 sockets, it is enough to connect only one.
Purger. (Not included in the boiler).
4.

FUEL QUALITY.

Your boiler is designed to operate with wood pellets; however, it can also work with other biomass fuels (ask
your dealer about this). Many types of pellets are sold on the market, with very different quality levels. For this
reason, it is essential that they meet certain requirements: Ø = 6 mm, length ≥ 5 and ≤ 25mm, relative humidity ≤
10%, individual density ≥ 1200kg/m
The boiler efficiency may vary depending on the type of pellets you use.
ECOFOREST do not have any control on the quality of the pellets you use. For this reason, ECOFOREST cannot
guarantee the full output of your boiler nor the eventual premature aging or eventual damage of the gas outlet. We
recommend using our pellets, which are approved according to the European Enplus A1 standard according to ISO
17225-2 and recognized by the ECOFOREST mark that is printed on the 15 kg bags.
It is recommended to create a physical barrier between the stored fuel and the boiler, according to the
regulations on boiler rooms.



Drawing 1
3
and no additives or impurities to compact the sawdust.

36

