General Information; Appliance Specifications; General Prescriptions; Reminders For The Installer - ALI 90GL/G400 Instrucciones Para Instalación, Uso Y Mantenimiento

GENERAL INFORMATION

This chapter contains general information which all users of
the manual must be familiar with. Specific information for
individual users of the manual is provided in subsequent
chapters ("INSTRUCTIONS FOR ....").
1

APPLIANCE SPECIFICATIONS

The label with the technical features of the appliance itself is
sticked on the right side of the appliance.
The serial numer is shown on the technical label.
2

GENERAL PRESCRIPTIONS

The manufacturer will not be liable for any damage or
injury resulting from failure to observe the following
rules.

REMINDERS FOR THE INSTALLER

•
Read this manual
information for safe installation, use and maintenance of
the appliance.
•
Installation, conversion to a different type of gas and
appliance maintenance must be carried out by qualified
technicians authorized by the manufacturer, in compliance
with current safety standards and the instructions in this
manual.
•
Identify the specific appliance model. The model number is
detailed on the packing and on the appliance data plate.
•
The appliance must be installed in a well-ventilated room.
•
Do not obstruct any air vents or drains present on the

appliance.

•
Do not tamper with appliance components.

REMINDERS FOR THE USER

•
Read this manual
information for safe installation, use and maintenance of
the appliance.
•
Keep this manual in a safe place known to all users so that
it can be consulted throughout the working life of the
appliance.
•
Installation, conversion to a different type of gas and
appliance maintenance must be carried out by qualified
technicians authorized by the manufacturer, in compliance
with current safety standards and the instructions in this
manual.
•
For after-sales service, contact technical assistance
centres authorized by the manufacturer and demand the
use of original spare parts.
•
Have the appliance serviced at least twice a year. The
manufacturer recommends taking out a service contract.
•
The appliance is designed for professional use and must
be operated by trained personnel.
•
The appliance is to be used for cooking food as specified in
the prescriptions for use. Any other use is considered to be
improper.
•
Do not allow the appliance to operate empty for prolonged
periods.
•
Only pre-heat the oven just before use.
•
Do not leave the appliance unattended while in operation.
•
In the event of an appliance fault or malfunction, shut the
gas shut-off valve and/or switch the appliance off at the
main switch installed up line.
•
Clean the appliance following the instructions given in
Chapter "INSTRUCTIONS FOR CLEANING".
•
Do not store flammable materials in close proximity to the
appliance. FIRE HAZARD.
•
Do not obstruct any air vents or drains present on the
appliance.
carefully. It provides
carefully. It provides
•
Do not tamper with appliance components.
• Children should be supervised to ensure that they do not
play with the appliance.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning
use of the appliance by a person responsible for their
safety.

REMINDERS FOR THE MAINTENANCE TECHNICIAN

•
Read this
information for safe installation, use and maintenance of
the appliance.
•
Installation, conversion to a different type of gas and
appliance maintenance must be carried out by qualified
important technicians authorized by the manufacturer, in compliance
with current safety standards and the instructions in this
manual.
•
Identify the specific appliance model. The model number is
detailed on the packing and on the appliance data plate.
•
The appliance must be installed in a well-ventilated room.
•
Do not obstruct any air vents or drains present on the
appliance.
•
Do not tamper with appliance components.

REMINDERS FOR CLEANING

•
Clean the satin finish stainless steel exterior surfaces, the
cooking wells and the surface of the hotplates every day.
•
At least twice a year, have an authorized technician clean
the internal parts of the appliance.
•
Do not use direct or high pressure water jets to clean the
important appliance.
•
Do not use corrosive products to clean the floor beneath
the appliance.

3 DISPOSAL OF PACKING AND THE APPLIANCE

3.1 PACKING

The packing is made using environmentally friendly
materials.
The plastic recyclable components are:
•
the transparent cover, the bags containing the instructions
manual and nozzles ( made of Polyethylene - PE)
•
the straps (in Polypropylene - PP).
3.2 APPLIANCE
The appliance is manufactured 90% from recyclable metals
(stainless steel, aluminium sheet, copper ...).
The appliance must be scrapped in compliance with current
regulations governing such disposal.
•
It must be disposed of properly.
•
Make the appliance unusable before scrapping.

INSTRUCTIONS FOR INSTALLATION

REMINDERS FOR THE INSTALLER
The manufacturer will not be liable for any damage or
injury resulting from failure to observe the following
rules.
•
Read this
information for safe installation, use and maintenance of
the appliance.
•
Installation, conversion to a different type of gas and
appliance maintenance must be carried out by qualified
manual carefully. It
manual carefully. It
provides important
provides important
29