Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Speaker
Configuration
• Press the Cursor buttons (A or
_r) to select the speaker to set,
then press the ENTER button.
• Press the Cursor buttons (A or
"tr) button to select the speaker
size, then press the ENTER but-
ton.
FRONT(L/R),
CENTER, SURROUND(L/R)
LARGE: Select this when the connected speaker is
capable of playing back sounds of 100Hz or
less.
SMALL: Select this when the connected speaker is not
capable of playing back sounds of 100Hz or
less.
NONE:
Select this when it is not connected. (It cannot
be set none on the FRONT speaker.)
SUB WOOFER
YES:
Select this when SUB WOOFER
is connected.
NONE: Select this when it is not connected.
NOTES:
• NONE is not available for SUB WOOFER when SMALL
is selected for FRONT (WR).
• SMALL is not available for FRONT (L/R) when NONE
is selected for SUB WOOFER.
o ON is not available for BASS ENHANCER when NONE
is selected for SUB WOOFER.
o When in playback of DVD audio, the sound may not
come out as set due to restrictions in the disc or the
player.
DELAY
TiME
With 5.l-channel
surround sound, ideally the distance
between the listening position and all the speakers
(exclude Sub woofer). The delay time setting can be
used to make the sound from the different speakers
reach the listening position at the same time.
Use the Cursor buttons (A or '_) to select the setting item,
then press the ENTER button.
• Press the Cursor buttons (,_ or
-_
_2
T) to select the speaker to set,
/
then press the ENTER button.
_
4
81JR
ROIJrqD
12f[
DEFALIL
ON
DISTANCE (Defaumt : FEET)
METERS (when the ENTER button is pressed):
The unit of distance is set to meters (m)=
FEET(when the ENTER button is pressed):
The unit of distance is set to feet (ft).
FRONT(L/R),
CENTER,
SURROUND(L!R)
(DEFAULT
: 12FT)
FRONT(L/R):
The distance can be set within
the range of 0 to 60 feet.
CENTER, SURROUND:
These are depends on the set-
ting value of FRONT(L/R)=
NOTES:
• It is not possible to adjust this item if CENTER and
SURROUND
have been set to NONE in the Speaker
Configuration
setting.
• When DEFAULT is selected and the ENTER button is
pressed, all the items are restored to their factory
default settings.
CHANNEL
LEVEL
When the channel level differs from
_;-.:_,:_"
_
each speaker, the adjustment
can
be made in the unit of dB (-12dB to
0dB).
TESTTONE:
• Press the Cursor
buttons (,& or
T) to select TEST TONE, then
press the ENTER button.
The test tone will output from
each speaker in turn.
CHANNEL
LEVEL:
Press the Cursor
buttons (A or
T) to select the speaker to set,
then press the ENTER button.
o Press the Cursor
buttons (A or
"tr) to select the desired level for
each speaker, then press the ENTER button.
NOTES:
o While the test tone is being output, the channel bal-
ance adjustment cannot be made.
• When TEST TONE is selected, no test tone will be out-
put from SUBWOOFER.
• It is not possible to adjust this item for the speaker that
has been set to NONE in Speaker Configuration
set-
ting.
Press the SETUP
button
to exit.
_4_ Speaker Setting for HDMI
When HDMI AUDIO is selected for
MULT! CHANNEL, the bass manage-
ment setting menu will appear. Set the
Speaker Configuration,
delay time and
channel level for each speakers (front,
center, surround and sub woofer).
AUDIO
Speaker
Configuration
Set the size of each speaker between
LARGE and SMALL.
_;j',,_
o The presence of the speakers is
detected automatically. Set the
detected speakers
size.
o When a speaker is not detected,
it's size is set as NONE.
• Once a speaker is detected, you
cannot set it to NONE.
_;j_j'_
• The default setting is LARGE.
o During RDMI audio output, the
sound output via analog channels
may be restricted.
DELAY TiME
Same as DELAY TIME setting for "Speaker Setting for
ANALOG AUDIO" on this page.
CHANNEL
LEVEL
Same as CHANNEL
LEVEL setting for "Speaker
Setting for ANALOG AUDIO" on this page.
- 27 -
EN
Tabla de contenido
