Play Back; Loading Discs; Important Setup Information - Denon ADV-700 Manual De Instrucciones

[] PLAYBACK
2
• Set discs in the disc tray with the labeled (printed) side facing
up.
8 cm disc guide __
12 disc guide
/
Disc tray
NOTE:
• DO not move the this unit while a disc is playing. Doing so
may scratch the disc.
(1) Opening and Closing the Disc Tray
(_ Turn on the power.
(_ Press the OPEN/CLOSE button.
Disc tray
Powe_
NOTES:
• Even when the power is in the standby mode, when the
OPEN/CLOSE button is pressed, the ADV-700's power
turns on and the disc tray operates. (Auto power on
function)
• Even if the function is set to something other than DVD,
when the OPEN/CLOSE button is pressed, the function
switches to DVD and the disc tray operates. (Auto
function select function)
• Do not strike on the button with a pencil, etc.
1
2
Refer to "CONNECTIONS" (pages 5 to 8) and check
that all connections are correct.
Turn on the power. ONSSTANDS¥
Press the POWER
button.
Main unit Remote control
unit
When pressed, the power turns on and the display lights. The
sound is muted for several seconds, after which the unit
operates normally. When pressed again, the power turns off,
the standby mode is set and the display turns off.
Whenever the ON/STANDBY button is in the STANDBY state,
the apparatus is still connected on AC line voltage. Please be
sure to unplug the cord when you leave home for, say, a
vacation.
(2) Loading Discs
• Pick up the disc carefully so as not to touch the signal
surface and hold it with the labeled side facing up.
• With the disc tray fully open, set the disc in the disc tray.
• Set 12 cm discs in the outer tray guide (Figure 1), 8 cm discs
in the inner tray guide (Figure 2).
• Press the OPEN/CLOSE button. The disc is automatically
loaded.
• The disc tray can also be closed automatically to load the
disc by pressing the PLAY button.
Figure 1
Outer disc tray
12 cm disc
Figure 2
Inner disc tray
8 cm disc
NOTES:
• If a foreign object is caught in the disc tray during closing,
simply press the OPEN/CLOSE button again and the tray
will open.
• Do not press the disc tray in by hand when the power is
off. Doing so will damage it.
• Do not place foreign objects in the disc tray. Doing so will
damage it.
IMPORTANT SETUP INFORMATION
This set has the following presettings: "DISC SETUP", "OSD SETUP", "VIDEO SETUP", "AUDIO SETUP", "RATINGS", and
"OTHER SETUP".
These presettings have been preset upon shipment from the factory. If you wish to change them to suit your specific purposes,
refer to pages 40 to 45.
Before operating the remote control unit!
• Be sure to set the DVD mode using the
remote control mode selector buttons.
(3)-1 13)-2,t3)-4
] _-_.
.... -- _ _ I
(3)-5 14)-I
Turn on the power. 4
• Press the power button, the power indicator lights
and the power turns on.
13)- 1__
t3)-6 |_ 0 2
I I?,
II
Press the OPEN/CLOSE button.
OPEN/CLOSE
2
Main unit Remote control unit
Press the OPEN/CLOSE button to open the disc tray.
O_EN/CLOSE
Main unit
5
Press the PLAY button.
• For many interactive DVDs and video CDs with
playback control, a menu screen appears. In this
case use the procedure in step 6 to select the
desired item.
3
Main unit
Set the disc in the disc tray.
/
Main unit Remote control unit
interactive DVDs are DVDs including multiple angles,
stories, etc.
Example: For DVDs with Example: For video CDs with
menu screens playback control
P neapp e
17