The Problem Is There Is A Hardware Error - HP Designjet 130 Serie Guía De Referencia Rápida

HP Designjet 130/130nr Printer - Quick Reference Guide

The Problem is there is a Hardware Error

If there is a hardware error with your printer, this icon flashes on the front panel:
The precise error is indicated by a pattern of squares displayed in the ink
cartridge icons on the front panel.
If the pattern of squares is similar to this...
... the problem is related to the set -up of your printer and is probably one of the
following:
• The inner cover of the printheads is not closed. Check that the latch on this
cover is in the correct position.
• The cover of the ink cartridges is not closed.
• Packaging has not been removed.
See the Using Your Printer CD or the installation poster for a reminder of how
to set up your printer.
If this doesn't solve the problem, run the HP Designjet System Maintenance as
described in "How Do I Use HP Designjet System Maintenance?" on page 22
and access the hp instant support web site. This is an automated service in
which your computer collects information from your printer about status and
error conditions, and sends it to HP web servers. These then display information
in your web browser about how to solve the problems detected.
Note that you must have an Internet connection to use hp instant support.
36