HP Designjet 130 Serie Guía De Referencia Rápida página 254

Impresora HP Designjet 130/130nr - Guía de referencia rápida
Manufacturer's Name:
Manufacturer's Address:
Declares that the product
Product Name:
Model Numbers:
Product Accessory:
Regulatory Model:
Conforms to the following Product Specifications
Safety:
EMC:
Supplementary Information
The product herewith complies with the requirements of the Low-Voltage Directive 73/23/EEC and
the EMC Directive 89/336/EEC and carries the CE marking accordingly.
(1)
The product exhibits class A operation when connected to LAN cables using print server
accessories.
(2)
The product was tested in a typical user configuration
(3)
This Device complies with part 15 of the FCC Rules. Operation is subject to the following two
Conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause
undesired operation
Sant Cugat del Vallčs (Barcelona),
th
October 24 , 2003
European contact: your local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH,
Department HQ TRE, Herrenberger Strasse 140, D-71034 Böblingen, Germany (Fax: +49 7031
143143)
DECLARATION OF CONFORMITY
according to ISO/IEC Guide 22 and EN 45014
Hewlett-Packard Espa ola S.A.
Inkjet Commercial Division
Avenida Graells, 501
08174 Sant Cugat del Vallčs
Barcelona, Spain
HP Designjet 100 Series Inkjet Printers
C7791X and C7796X (where X represents any single letter)
All
BCLAA-0302
IEC 60950:1999
EN 60950:2000
IEC 60825-1:1993 + A1
EN 60825-1:1994 + A11 Class 1 for Laser/LED
CISPR 22:1997 / EN 55022:1998 Class B
CISPR 24:1997 +A1 / EN 55024:1998 +A1
IEC 61000-3-2:2001 / EN 61000-3-2:2000
IEC 61000-3-3:2002 / EN 61000-3-3:1995 +A1
FCC Title 47 CFR, Part 15 Class B
Josep-Maria Pujol,
Product Regulations Manager
50
(1)(2)
(1)(3)