Ec Declaration Of Conformity (Original) - Xylem LOWARA ESH ATEX Serie Manual De Instalación, Uso Y Mantenimiento

en - Original instructions
4. Object of the declaration: Pump unit (see
label on first page)
5. The object of the declaration described
above is in conformity with the relevant
Union harmonization legislation:
•
2014/34/EU Directive of 26
February 2014 (equipment intended
for use in potentially explosive
atmospheres)
•
2014/30/EU Directive of 26
February 2014 (electromagnetic
compatibility) and subsequent
amendments
•
2011/65/EU Directive of 8 June
2011 (restriction of the use of
certain hazardous substances in
electrical and electronic equipment)
and subsequent amendments.
6. References to the relevant harmonized
standards used or references to the other
technical specifications, in relation to
which conformity is declared:
•
Pump: EN 1127-1:2011, EN
15198:2007, EN ISO 80079-
36:2016, EN ISO 80079-37:2016;
Electric motor: refer to electric motor
manufacturer's declaration of conformity
included in the supply.
Flexible coupling: refer to flexible coupling
manufacturer's declaration of conformity
included in the supply.
•
Refer to electric motor
manufacturer's declaration of
conformity included in the supply.
•
EN 50581:2012
7. Notified body:
(ATEX)
Pump: SGS Baseefa Limited (NB 1180)
performed the EU-type
examination and issued the certificate
Baseefa16ATEX0067X;
Electric motor: refer to electric motor
manufacturer's declaration of conformity
included in the supply.
Flexible coupling: refer to flexible coupling
manufacturer's declaration of conformity
included in the supply.
8. Additional information:
(ATEX) The following specific conditions
of use apply.
- The equipment must be suitably earthed
prior to operation.
- It is the user's responsibility to ensure
the equipment does not run dry. Any
control system used to achieve this must
comply with the relevant requirements of
EN 80079-37.
- The equipment may only be operated
when it is filled with the liquid to be
pumped.
- The liquid to be pumped must have
conductivity >1000 pS/m (CLC/TR
20
60079–32–1:2015)
- For T4 operation the maximum
temperature of the liquid to be pumped
must not exceed 90°C.
Pump: II2G Ex h IIC T4 Gb
-10°C≤ Tamb ≤+55°C
Electric motor: see the motor data plate.
Flexible coupling: see marking on
coupling.
(RoHS) Annex III - exemptions - 6a),
6b), 6c).
Signed for and on behalf of: Xylem Service Italia
S.r.l.
Montecchio Maggiore, 30.09.2019
Amedeo Valente
(Director of Engineering
and R&D)
Rev.00
Lowara is a trademark of Xylem Inc. or one of its
subsidiaries.
1.6.3 EC Declaration of Conformity
(Original)
Xylem Service Italia S.r.l., with headquarters in
Via Vittorio Lombardi 14 - 36075 Montecchio
Maggiore VI - Italy, hereby declares that the
product
Pump (see label on first page)
fulfils the relevant provisions of the following
European Directives:
•
Machinery 2006/42/EC and subsequent
amendments (ANNEX II - natural or legal
person authorised to compile the
technical file: Xylem Service Italia S.r.l.)
•
Eco-design 2009/125/EC and subsequent
amendments, Regulation (EU) No
547/2012 (Water pump) if MEI marked,
and the following technical standards.
•
EN ISO 12100:2010, EN
809:1998+A1:2009.
Montecchio Maggiore, 30.09.2019
Amedeo Valente
(Director of Engineering
and R&D)
rev.00