Schick Dental QUBE II Manual De Instrucciones página 54

8 Operating software
After switching on, the LCD display of the
all operating conditions of the device.
In particular, the following parameters are displayed:
Readiness indicator
-
is switched off.
Ready for operation
-
tion of rotation.
Operating state:
-
flashes when the motor is stopped.
Speed:
- Indicates the pre-set maximum speed (x 1000)
Load/torque:
-
loaded. If all bars are shown and the handpiece is continually used, the safety switch
will turn off the motor.
Electric wax knife:
-
knife is operational.
Electric wax knife adjustment:
-
Speed control:
-
Direction of rotation:
-
D21518
20/32
: (Switched on/off) The display shows "OFF" when the
: The display shows the preselected maximum speed and the direc-
The speed symbol is lit continuously when the motor is running and
The bar display shows the power currently used by the motor when
An illuminated symbol indicates whether the optional electric wax
Indicates the pre-set heating value
Shows the activated speed control
Shows the current direction of rotation of the motor
Original
operating unit informs you about
Instructions