Panasonic ES‑LV9N Instrucciones De Funcionamiento página 12

Charging without the self-cleaning recharger
• Wipe off any water droplets on the appliance socket.
1
Insert the appliance plug into
the shaver.
2
Plug the adaptor into a
household outlet.
3
Disconnect the adaptor after
charging is completed.
Note
You cannot operate the shaver while charging.
Preparing the cleaning liquid
Cleaning can start right after the usage by preparing in advance.
(See page 15.)
• Remove the AC adaptor from the self‑cleaning recharger.
1
Press the cleaning
liquid unit removal
button (1) and
remove the cleaning
liquid unit (2) on a
hard, flat surface.
• When the self‑cleaning recharger is lifted, or on the soft
surface such as carpets, the lock release lever will not fit in
the recharger properly. In that case, the cleaning liquid unit
cannot be removed.
12
2
1


2
Pour tap water (1) and
detergent (2) into the
cleaning liquid unit.
• Be careful not to let the
water rise above the
maximum water line (a).
• Pour the entire packet of
detergent.
3
Slowly insert the
cleaning liquid unit
into the self-cleaning
recharger until it clicks.
Notes
• To replace the cleaning liquid, see page 18.
• Only use self‑cleaning recharger detergent for Panasonic shavers.
Not doing so may cause malfunction or failure.
• Do not tilt the self‑cleaning recharger.
Doing so may cause spill or the number of days that cleaning
liquid can be used reduce.
• You can use the cleaning liquid for approximately 30 days if used
once per day.
(This will differ depending on beard thickness and the ambient
temperature.)
 
