Removal Of Sliding Trims - ifi SAM80 Manual Para El Uso Y Mantenimiento

- You should also make sure, during installation
(Fig. 5), that:
unit but not so much as to constitute a draught.
- The display unit is not placed near sources of hot
air.
- It is not exposed to direct sunlight.
- The grilles designed to let air pass through for the
cooling of the condenser are not blocked.
- Any air conditioning or heating inside the premises
is not directed at the display unit.
NOTE:
The instructions listed above must be
observed in order to prevent appliance
malfunctions which are not covered by
the guarantee.

2.5 REMOVAL OF SLIDING TRIMS

CAUTION!
T H I S P R O C E D U R E S H O U L D B E
PERFORMED BY 2/3 PEOPLE.
- Remove the rear grid panel (Fig.6 pos.A), the
unscrewing the 2 screws (Fig.6 pos.C) in the top
corners.
- Remove the screws (Fig.7 pos.D) that secure the
rear trim to the frame.
C
A
D
45
GB
Fig.5
Fig.6
B
Fig.7