Making Holes For The Pipes - Saunier Duval SDH 17-025 NW Manual De Instalación

INSTALLATION
9.3.4

Making holes for the pipes

• Case A: Pipework exiting from the rear of the unit.
In this case, a suitable hole must be made in the wall behind
the unit (see Figure 9.6).
- Drill a hole in accordance with the diameter and position
as indicated in Figures 9.6, ensure the hole is slightly
descending to the outside to allow for a fall in the drain line.
The dimensions are given in mm.
Fig. 9.6 Mounting plate for 17-025 NWI and 17-035 NWI.
EN
Fig. 9.7 Mounting plate for 17-050 NWI.
- 12 -
SDH17-NW-I_EN - 01/15 - Saunier Duval