Install; Installing Your Pet Door; Determine Pet Door Location - Petsafe SmartDoor PPA19-15791 Manual De Adiestramiento

.
STEP 1

Installing Your Pet Door

Determine Pet Door Location

Fig. 1A
Fig. 1B
STEP 2
Preparing Door
Fig. 2A

INSTALL

Measure and mark your pet's shoulder height on the door
(Fig. 1A).
Determine location for the pet door. Draw a vertical
centre line through the shoulder height line using a level
(Fig. 1B).
If homeowner's door or other application
is not level, the pet door must be marked
level to swing properly.
Helpful Tip: Mark shoulder height and vertical centre
line lightly with a pencil or on a piece of tape so marks
can easily be erased or removed.
Match the marked lines on the door with the shoulder
and centre lines on the template. Tape the template in
place and carefully trace cutting template. Make sure to
trace underneath tape and connect the corners. Remove
the cutting template and any excess tape from the door
(Fig. 2A).
When applying the template there should
be a minimum of 7.6 cm between the
bottom and sides of the door and the
outer edge of the template to maintain the
structural integrity of the door.
www.petsafe.net 11