Install Pet Door - Petsafe HPA11-10876 Guia De Instalacion

Step 4

Install Pet Door

NOTE: Your PetSafe
In Doors and Walls Less Than 2 ¼" (57 mm) Thick
4A
4B
4C
cat door should be installed with the red 4-way lock on the inside of your house.
®
4A. Temporarily place the cat door in the hole and position the
exterior frame on the outside of the door. From the outside, mark
screw holes on the door through the holes in the exterior frame.
4B. Remove the cat door and drill the holes with a 3/16" (5 mm) drill bit.
4C. Replace the cat door in the hole and screw into place. If the
screws are too long they may need to be cut down to match the
depth of your door. Using over-long screws may damage the cat
door. The screws should be removed from the cat door before
cutting. File down to ensure there are no sharp edges.
Finally, cover the screw holes with the finishing plugs on the
exterior frame to ensure a neat finish.
www.petsafe.net 7