Optical Power Meter Function (Opm) - Promax PROLITE-65 Manual De Instrucciones

USER'S MANUAL PROLITE-65
4.2.3.1

OPTICAL POWER METER Function (OPM)

This function allows you to measure optical power across the wavelength band
(1250 nm - 1650 nm).
Under the situation of laboratory, LANs, WANs and CATV as well as
longdistance optical network, the Optical Power Meters, together with PROMAX
stabilized laser sources, can be used to identify optic fibre, measure optical attenuation,
verify continuity and evaluate fibre link transmission quality.
To access this function:
1.- Press CONFIG
2.- Press
3.- Press SEL
below).
Next are described each one of the fields on screen:
[1] Wavelenght at which it is measuring. Available wavelenght are 1310, 1490,
1550 and 1610 nm.
[2] It is an arrow which indicates if the value exceeds (arrow pointing up) or does
not arrive (arrow pointing down) to the minimum levels in order to be
graphically represented.
07-2010
[2].
or [5] until pointing at OPTICAL POWER METER.
[4] or CONFIG
Figure 8.- OPTICAL LOSS TEST SET.
[2] to get into this function (see figure
Page 17