Logger Function - Promax PROLITE-65 Manual De Instrucciones

USER'S MANUAL PROLITE-65
c) Network type
You can select between two network protocols: RFoG or xPON.
RFoG protocol uses wavelenght signals of 1550 nm for Downstream and
1310 and 1610 for Upstream.
xPON protocol uses wavelenght signals of 1490 and 1550 nm for Downstream
and 1310 for Upstream.
4.2.3.5

LOGGER Function

LOGGER function takes data and save them on the memory, so they can be
viewed or downloaded on a computer
Each funtion has its own logger memory up to 99 loggers par function.
To access the LOGGER Function:
1.- From the function you are press STO / RCL
2.- Upper line on the screen changes (see figure below).
In this line is shown the last logger accessed and date and hour when was
taken.
3.- If the upper line does not show date and hour means that the register is
empty (see figure below).
4.- To move between loggers press
5.- To take a logger press again STO / RCL
Logger" appears on screen and the logger is updated with the current date
and hour.
07-2010
Figure 13.- Logger.
Figure 14.- Empty Register.
or
[3].
[5].
[3]. Then the message "Saving
Page 25