Optical Power Meter Function (Opm) - Promax PROLITE-67 Manual De Instrucciones

USER'S MANUAL PROLITE-67
[10] The OLT led indicates the status of the OLT signal with respect to the
threshold values. Three indicator lights colours are possible and each colour
represents status signal with respect to threshold values: GREEN (PASS),
AMBER (HIGH) and RED (LOW).
To navigate through the editable fields on the screen press SEL
selected field changes to shaded.
To edit a threshold group of values, select it and press
To capture a new reference value, select the current reference value and press
both keys and
To make or consult a logger refer to the section LOGGER Function.

4.2.5 OPTICAL POWER METER Function (OPM)

This function measures independently the power for each wavelength by the
action of the selective filters that only let pass the signal corresponding to the selected
wavelength.
Under the situation of laboratory, LANs, WANs and CATV as well as
longdistance optical network, the Optical Power Meters, together with PROMAX
stabilized laser sources, can be used to identify optic fibre, measure optical attenuation,
verify continuity and evaluate fibre link transmission quality.
To access this function:
1.- Press MENU
2.- Press
3.- Press SEL
07-2012
[5] simultenously.
[2].
or [5] until pointing at OPTICAL POWER METER.
[4] to get into this function (see figure below).
[4]. The
or [5].
Page 19