8. Pairing with an MP3 player
•
The SCS kit has a Bluetooth® A2DP profile, which lets you listen to your
music inside the helmet through an MP3 player (with a Bluetooth® com-
munication interface) or a mobile phone (with the same A2DP profile).
•
This procedure pairs your Bluetooth® MP3 player with the SCS kit and
must be followed the first time you use the MP3 player with the kit.
•
The MP3 player will detect the SCS kit as a normal earpiece.
Proceed as follows:
•
With the device switched off, press and keep the ON button pressed
for 8 seconds (it will emit a triple high-pitched tone) to enter the MP3
pairing mode
•
Add a Bluetooth® device to your MP3 player (see player's instruction
manual)
•
The MP3 player will then display the devices detected, select Suomy-
Com (or the name which has been set using the configurator)
•
The MP3 player will ask for a password, enter 0000 and press OK
•
If the pairing has been completed successfully, you will hear a tone of
confirmation
When the MP3 player is paired with the SCS kit, please consult the instruction
manual of your MP3 player so that you can listen to your music.
NOTE: some MP3 players do not automatically connect after entering the
code 0000.
In this case, proceed in one of the following ways:
•
Medium press the ON button and
•
Proceed with connection (as shown in the user's manual of the player)
using the Bluetooth® menu of your MP3 player
For more information on the A2DP profile, please visit the site www.a2dp.
info .
84
-