STOK GRIDIRON STE1150Q Manual Del Usuario página 11

STEP 4: ATTACHING FIREBOX HANDLE
See Figures 12 - 13.
 Raise and open the stand.
 Lift the hood latch then raise firebox hood.
 Insert studs in firebox handle (A) through holes in firebox
hood.
 Install wing nuts (AA) and tighten securely.
STEP 5: INSTALLING THE GREASE CUP
See Figure 14.
 Slide the grease cup (C) into the cup holder on the bottom
of the grill.
NOTE: Clean the grease cup after each use. Do not remove
the grease cup until after the grill has cooled completely.
Do not transport the grill with a dirty grease cup.
STEP 6: CONNECTING TO POWER SUPPLY
See Figure 15.
The grill is designed with a cord retainer that prevents the
power cord (F) from being pulled loose while using.
 Lift the cord retainer, and plug the female end of power
cord into the grill's DC receptacle.
 Connect the other end of the cord to the power supply.
FIREBOX
Fig. 12
ASSEMBLY
HOOD
LATCH
FIREBOX
HOOD
11 — English
FIREBOX
HANDLE
WING
NUT
Fig. 13
GREASE
CUP
Fig. 14
FIREBOX
HOOD